威海電動叉車制動失靈的幾種常見原因!

時間:2023-06-20 點擊:228次
連續踩踏幾下制動踏板,踏板不升高并感到無阻力。故障分析與排除:應先檢查制動總泵是否缺少制動液;踩下制動踏板。
press the brake pedal several times continuously, the pedal will not rise and feel no resistance. troubleshooting: check the brake master cylinder for lack of brake fluid first; press the brake pedal.
故障分析與排除:無聯動感,則可能是踏板至制動總泵的連接脫開,應檢查連接機構并連接好;踩下制動踏板,雖感到有一定阻力,但踏板位置保持不住,明顯下沉,且總泵有漏液或噴液現象。
troubleshooting: if there is no linkage, it may be that the connection between the pedal and the brake master cylinder is disconnected. check the connection mechanism and connect it well. if you step on the brake pedal, you may feel some resistance, but the pedal position cannot be maintained, obviously sinks, and the master cylinder is leaking or spraying liquid.
故障分析與排除:多為制動總泵密封件破裂。應分解制動總泵,更換總泵密封件。
fault analysis and troubleshooting: most of the brake master cylinder seals are broken. disassemble the brake master cylinder and replace the master cylinder seal.
威海電動叉車租賃有保養周期,應該按照電動叉車的保養周期實行強制保養,而一般用戶對"強制保養"的理解則“強迫”去做“保養”,隨著電動叉車行業的迅速發展,很多威海電動叉車租賃用戶已有一定的對叉車或電動叉車維修知識,于是就“隨壞隨修”。相對于叉車的使用壽命而言,實行"周期強制保養"的叉車使用壽命也大大超過"隨壞隨修"的叉車,可以根據叉車的實際工作頻度確定保養周期進行強制保養。
electric forklift leasing has a maintenance cycle, which should be enforced according to the maintenance cycle of electric forklift, while the general user's understanding of "forced maintenance" is "forced" to do "maintenance". with the rapid development of electric forklift industry, many electric forklift leasing users have a certain knowledge of forklift or electric forklift maintenance, so "repair as you go". compared with the service life of the forklift, the service life of the forklift with "periodic compulsory maintenance" is much longer than that of the forklift with "repair when damage occurs". the maintenance cycle can be determined according to the actual working frequency of the forklift for compulsory maintenance.